日本語で商品検索ができます。 信頼できる購入代行【ワンモア】
今日の為替レート
お振込銀行
クレジットカード支払い
 |
ログイン | LOGIN
商品カテゴリー
- ブランドファッション
- ファッション/雑貨
- ビューティー
- 食品
- 出産/育児
- 生活雑貨
- パソコン
- レジャー
(PP-A689) 1채널 지연 릴레이 모듈 가변 5V-30V
|
|||||||||||||||||
| 商品購入についてのご案内 | |||
|
|||
Description :
▶ Trigger Time Delay Switch Relay Module Adjustable Time Delay Control Swtich
▶ MicroUSB 5.0V power supply with an input port, easy to use, 5 ~ 30V wide supply voltage.
▶ Adjusting the potentiometer can set the length of time.
▶ Anti-interference ability, the relay at various interference will not misoperation, suitable for industrial control.
features :
▶ Working voltage: Wide voltage any voltage between 5-30V, Micro USB power connector and two solder terminals
▶ Operating mode: feed the module power, output of the module state: normally open (NO) and the common terminal (COM) disconnected, normally closed (NC) and the common terminal (COM) is turned on. Originating outside the contact (TRIG) to a low pulse signal, or touch trigger button and instantly, the relay and, working lights, this time, the status of the relay output: normally open (NO) and the common terminal (COM) is turned on, Normally Closed (NC) and the common terminal (COM) is disconnected after 0-24 seconds (this time can be adjusted according to your needs) relay opens after the bell, then relay back to the state before the trigger.
▶ The time can be adjusted via a potentiometer, default 0-24 seconds. If you need more time, more replaceable capacitor (C2) or potentiometer. Delay time formula: T = 1.1RC. For example: 1M resistor capacitor 22uf then T = 1.1 * 0.000022 * 1000000 = 24.2 seconds.
▶ With a relay indicator.
▶ The module can be controlled: 10A 250VAC (AC), 10A 30VDC (direct current) following loads.
▶ Has freewheeling protection relay.
▶ signal terminal block is designed with a pull and a filter circuit, anti-jamming capability, suitable for industrial control. Many manufacturers have added optocoupler isolation, but with the trigger signal to the module and not isolation, would not achieve the interference effect. After the test was found to trigger or enhance the stability of end to interference, regardless of this module is the electromagnetic interference environment, or instantly through power module, the relay will not malfunction.
▶ Trigger Time Delay Switch Relay Module Adjustable Time Delay Control Swtich
▶ MicroUSB 5.0V power supply with an input port, easy to use, 5 ~ 30V wide supply voltage.
▶ Adjusting the potentiometer can set the length of time.
▶ Anti-interference ability, the relay at various interference will not misoperation, suitable for industrial control.
features :
▶ Working voltage: Wide voltage any voltage between 5-30V, Micro USB power connector and two solder terminals
▶ Operating mode: feed the module power, output of the module state: normally open (NO) and the common terminal (COM) disconnected, normally closed (NC) and the common terminal (COM) is turned on. Originating outside the contact (TRIG) to a low pulse signal, or touch trigger button and instantly, the relay and, working lights, this time, the status of the relay output: normally open (NO) and the common terminal (COM) is turned on, Normally Closed (NC) and the common terminal (COM) is disconnected after 0-24 seconds (this time can be adjusted according to your needs) relay opens after the bell, then relay back to the state before the trigger.
▶ The time can be adjusted via a potentiometer, default 0-24 seconds. If you need more time, more replaceable capacitor (C2) or potentiometer. Delay time formula: T = 1.1RC. For example: 1M resistor capacitor 22uf then T = 1.1 * 0.000022 * 1000000 = 24.2 seconds.
▶ With a relay indicator.
▶ The module can be controlled: 10A 250VAC (AC), 10A 30VDC (direct current) following loads.
▶ Has freewheeling protection relay.
▶ signal terminal block is designed with a pull and a filter circuit, anti-jamming capability, suitable for industrial control. Many manufacturers have added optocoupler isolation, but with the trigger signal to the module and not isolation, would not achieve the interference effect. After the test was found to trigger or enhance the stability of end to interference, regardless of this module is the electromagnetic interference environment, or instantly through power module, the relay will not malfunction.
