mSATA M2 USB Adapter Case SSD Externo USB 3.0 M.2 to USB mSATA SSD M2 SSD to USB3.0 Converter Riser 2.5" Enclosure USB 3 Adapter
About Description:
Feature:
1. Convert M.2 SATA Protocol SSD or MSATA SSD into SATA2.5"/3.5" hard disk;
2. Fully compatible with SATA3.1 standard;
3. Not compatible with PCI Express M.2 protocol, and does not support NVME SSD;
4. M.2 SATA SSD and MSATA SSD allow input voltage of 3.3V, maximum current of 3A, and the speed is related to the SSD itself;
5. Support M.2 SATA SSD of 22x80mm 22x60mm 22x42mm 22x30mm;
6. Support full-height and half-height size MSATA SSD.
7. Switch toggle design: NGFF mode switch up; MSATA mode switch down.
8. With SATA3.0 to USB3.0 Cable(Optional)
Warm Tips:
① NVME hard drives are not supported;
② You can insert two SSD at the same time, but Only one SSD can be recognized at a time, manual switch to msata or ngff mode,
The NGFF part is only applicable to B-key or B/M-key interfaces, not support M-key NVME interfaces.
You'll receive:
1 x (Board + Screwdriver)
or
1 x (Board + Shell + Screwdriver)
or
1 x (Board + SATA3 Cable + Screwdriver)
or
1 x (Board + Shell + SATA3 Cable + Screwdriver)